4001-005 Steel - 2500kg
80mm shank

4001-010 Chrome - 3500kg
62mm shank

4001-020 Steel - 2270kg
42mm shank

4001-101-11 7/8" nut

4002-001 50mm

4002-010 1&7/8"

4002-020 2&1/4"

4002-030 2&1/8"

4002-121-02 3/4" bolt, nut, washer

Push on tow ball covers enhance vehicle’s appearance and protect clothing from grease when trailer is unattached.

0115-001 Black -soft PVC

0115-005 Black - firm PVC

2000 kg capacity. 50mm snap on plunger couplings fitted with head adjusting screw.

4006-150 Trigg 2 hole

4006-155 Trigg 3 hole

4006-160 Trigg 4 hole

4006-180 Alko 2 hole

4006-185 Alko 3 hole

ALKO. Square shaft. 2000 kg capacity. A quick release, weld-on coupling with adjusting screw to accommodate 50mm tow ball.

A multi function tool. Used for tightening star coupling nuts.

Steel base plate and hand parking lever for attachment with mechanical over-ride couplings.

4012-101-91 Trigg

3000 kg capacity, 50mm fixed couplings with adjusting screw. Complete with hand parking brake.

2000 kg. With 3/4" master cylinder. To suit single brake axles.

4008-227 Alko

2000 kg.

4009-400 Alko

4009-360 Trigg

A multi-faceted swivel coupling allowing maximum angulation for off road trailering. 2500kg.

4010-105 Coupling only

4010-201 Complete with override attachment

4010-105-05 Pull pin

4010-105-07 R-clip

TREGG. 2270kg. Includes detachable U and spring pin, brake plate and coupling.

4010-308 Override polyblock coupling only

4010-305-03 Spring pin only

4010-305-04 Spring pin clip

4010-305-05 U & spring pin

4012-101-01 Cast trigger

4012-101-03 Press trigger, spring & rivet

4012-101-06 Safety spring

4012-101-11 Bare handle

4012-101-13 Handle, trigger & spring

4012-101-14 Roll pin for handle

4012-101-16 Spindle

4012-101-21 Hydraulic bracket

4012-101-22 Clevis & split pins for master cylinder

4012-101-23 Bolt & nut for master cylinder

4012-101-24 O/R hydraulic adaptor kit

4012-101-26 Reversing latch

4012-101-27 Knurled pin for backing stop

4012-101-30 Head assembly for hydraulic O/R

4012-101-31 Roll pin for coupling head

4013-101-03 Hydraulic bracket less master cylinder

4013-101-04 Hydraulic bracket with master cylinder

A simple and practical kit that allows the distribution of 80kg from the rear end of the car to the front wheels and the wheels of the trailer, thereby reducing any tendency for the rig to sway.

0111-011 Kit with bolt-on brackets

0111-015 Kit with weld-on brackets

10" x 2&1/4" brake assemblies with park brake attachment.

4015-005 Right hand - Off side

These 10" x 2&1/4" electric brake kits come complete with mounting flange, brake assembly, and hub drum including wheel studs, nuts, bearings and seals for two wheels.

4016-005 LM bearings - Holden

4016-010 Composite bearings - Holden/ Ford

4016-015 Slimline bearings - Ford

9" x 1&3/4".

4015-100-R Right hand - Off side

9" x 1 & 3/4".

4015-200 Right hand - Off side

Complete with studs.

4074-501 10" electric Holden HT

4074-551 10" electric Holden HQ

4019-001 3/4" PBR

4019-005 3/4" IBS

4019-010 7/8" IBS

4019-050 3/4" cap

4019-025 7/8" reservoir

4019-075 Brass m/cyladaptor

4019-080 Gasket for m/cylinder

4019-105 3-way axle tee

4019-155 Short 3/16" tube nut

4019-160 Long 3/16" tube nut

4019-170 3/16" tube joiner

Handbrake cable tension adjuster including nylon pulley and lock nut.

Free running pulley within steel housing prevents undue wear on brake cable and provides longer life and less maintenance.

Galvanized tensioning turnbuckles are suitable for many applications. Available in many sizes and as ‘eye and eye’ or ‘hook and eye’

4020-015 8mm H&E

4020-018 6mm E&E

4020-019 8mm E&E

4020-020 9.52mm E&E

Galvanised wire rope clamps used to secure wire rope to attachments.

4mm multi-strand galvanised wire rope cable.

Replacement magnet for the KELSEY HAYES round brake assembly.

4022-003 Spring

Replacement electromagnets for the KELSEY HAYES oval brake assembly. Complete with spring and clip.

4022-005 L/H to suit round magnet

4022-006 R/H to suit round magnet

4022-015 L/H to suit oval magnet

• Cable adjuster

4020-039

Effortless lifting and manoeuvrability of any caravan or trailer up to 1360kg.

Features:

• Durable powder coat finish

• Dual lights for after dark operation

• 1360kg of lifting power

Specifications:

• Vertical load: 1360kg

• Travel: 430mm

• Power requirement: 12 volt dc

• Retracted height: 650mm

• Unit weight: 12.6kg

Feature a pressed ring outer tube that engages positively in the retaining clamp, thereby eliminating any tendency for the jockey wheel to slip. These jockey wheels have a solid 6" x 2" rubber wheel with a 1/2" axle bore.

4031-101 With clamp

WELDED DOTS. This standard jockey wheel has non-slip tabs welded to the outer tube, making it very suitable as a replacement jockey wheel for those wheels that are integral with couplings.

A standard 6" x 2" jockey wheel attached to a fixed swivel plate that allows the jockey wheel to be carried in the horizontal plane whilst travelling. With locking pin.

A fully adjustable jockey wheel featuring the non-slip pressed ring outer tube and a heavy duty 8" x 2" metal wheel with solid rubber tyre and 5/8" axle bore.

4032-101 Extra Height. Comes with clamp. 150mm taller than standard jockey wheel

The ultimate single wheel jockey wheel that allows for easy moving of the RV. The large 350 x 410 pneumatic tyre provides maximum traction and weight carrying capacity.

4033-120 With clamp

Bolt-on hinged gate clamp for easy detachment of jockey wheel for touring.

4037-101-11 1/2" clamp bolt & washer

Complete with handle and clamp. A most efficient caravan mover featuring original dual pawl ratchet system. This model can be mounted on either side of the drawbar, thereby allowing maximum manoeuvrability. It is fitted to the normal jockey wheel bracket and can be wound up to a height of 840mm.

0045-401-01 Handle

Hydraulic jack / jockey wheel, specifically designed for caravans, trailers and horse floats. Easily fitted to most caravans and trailers. Eliminates the need to crawl under a van to change a flat tyre.

0045-050-01 Base plate

0045-050-03 Lifting clamp

0045-050-05 Jacking bracket

6" x 2" solid rubber wheel engaged in a fixed bracket allowing an easy swivelling action.

This industrial jockey wheel features extremely strong outer and inner stem tubes for commercial use, and an 8" x 2" metal wheel with solid rubber tyre. It is supplied with swivel plate.

4036-001 With locking pin

10" x 2" rubber tyre moulded to cast alloy wheel. Features a heavy duty inner shaft. Comes with or without swivel plate.

4037-015 Weld-on light duty swivel plate

Complete with single clamp and a 150 x 150 x 6mm flat steel base. NOTE: Closed and extended heights.

Common replacement wheel for the 6" x 2" jockey wheel.

4038-101-27 Tyre only to suit 250 x 4 rim

4038-101-28 250 x 4 tube only

4038-101-55 Tyre & tube to suit 410 x 350 rim

4038-101-57 Tyre only to suit 410 x 350 rim

Heavy duty adjustable stand. 150 x 100 x 10mm flat steel base. Complete with clamp.

NOTE: Closed and extended heights.

A fabricated steel corner stabilizer which engages the winding handle at the same end as the foot. Suits slotted style jack handle.

4051-201 18"

4051-211 24"

In these units the winding handle engages from the opposite end to the foot of the jack. Power thread. Suits slotted style jack handle.

4051-402 500mm

Steel channel jacks provide greater carrying capacity. In these units the winding handle engages from the same end as the foot of the jack.

4051-401 500mm - metric

Handle 550mm

4061-002 Standard - 550mm

4061-003 Long - 720mm

Suits corner stabilizers fitted to genuine MILLARD caravans.

Fits inside genuine FRANKLIN jacks and outside some VISCOUNT jacks.

Low profile. Steel treadplate. 455mm wide. 60mm fixing frame.

Steel treadplate. 500mm wide with 165mm mounting frame.

Double steel treadplate.

Height: 240mm

Width: 760-450mm

Depth: 280mm

Height: 240mm

Width: 1545-1260mm

Depth: 280mm

4071-115 Outer bearing assembly LM12749/10 - Ford

A must for all boat trailers! Protects bearings. Fast and easy refill. Non corrosive.

Fits trailers using late model Holden hubs (2.328" ID). Suits all axle shafts 1&7/16" to 1&5/8".

4095-010 6mm

4095-011 8mm

4091-505 3/8" plated

4091-509 1/2" plated

4076-006 14" HT/HK

4076-011 14" HQ

4081-003 Retaining nut

4081-004 Rubber top bush

4081-005 Coil spring

4081-006 Pressed steel washer

4081-007 Chassis mount plate

4075-509 13" - Cream

4075-511 13" - Grey

4075-528 14" - Grey

4075-529 14" - White

4078-002 White - fibreglass

Replacement spat for original MILLARD vans.

Ideal for soft ground and help support the vehicles weight. Pack of 4 anti-sinking bases with 4 locks for fastening onto the vehicles jacks. Permanently secured even when travelling. Grey. 190mm x 145mm.

Ideal for soft ground and help support vehicles weight. Pack of 4 highly reinforced anti-sinking plates. Yellow. 200mm diameter.