|
|
|
 |
LOOS TENSION GAUGES Take the guesswork out of cable tension adjustment. Designed for accurate repeatable tuning of a sailboat’s standing rigging. Manufactured of rugged anodised aluminium, the gauge is corrosion-resistant and will provide years of service. Each model includes a Loos & Co diameter gauge. SOLO-90-0102 Model 91. For cable diameter 2.5mm, 3mm & 4mm SOLO-90-0103 Model 90. For cable diameter 5mm, 6mm & 7mm
|
|
|
|
 |
LOOS TENSION GAUGES ‘Professional Model’. Designed to provide an accurate measurement of the tension rigging wire and other types of cable used in recreational and industrial applications. It is particularly useful for accurate and repeatable tuning of a sailboat’s standing rigging. Each model covers a tension range from approximately 5% to 25% of the breaking strength of the wire. Designed and tested to provide an accuracy of plus or minus 3% at mid range. SOLO-90-0095 Model PT1M. For cable diameter 2.5mm, 3mm & 4mm SOLO-90-0098 Model PT2M. For cable diameter 5mm, 6mm & 7mm
|
|
|
|
|
STAINLESS STEEL WIND INDICATOR Sensitive to slight changes of air flow. Easy to read fin and inertia vanes. SOLO-2906
|
|
|
|
 |
LITTLE HAWK MK1 Wind indicator for small dinghies and sailboards. These are the smallest of the HAWK range. This simple and economical wind vane fastens easily to small dinghy and sailboard masts, or can be mounted below the gooseneck. Length of vane: 165mm Overall height: 310mm Suits 4mm masts. SOLO-2889
|
|
|
|
 |
HAWK Wind indicator for sailing dinghies Lightweight, balanced vane-arm mounted above two reference arms, enabling the helmsman to judge accurately the angle of the apparent wind to the boat. Length of vane-arm: 270mm Overall height: 300mm SOLO-2901 SOLO-2901-1 Arrow indicator SOLO-2901-2 Tracking arms
|
|
|
|
 |
SLOTSTRIP FLEXIBLE MOULDING A flexible strip for sealing the centreboard or daggerboard slot on dinghies, catamarans and sailboards. SOLO-SS50 50mm x 30m roll SOLO-SS75 75mm x 30m roll
|
|
|
|
 |
LITTLE HAWK MK11 Wind indicator for small dinghies and sailboards. Fastens easily to small dinghy and sailboard masts, or can be mounted below the gooseneck. Bearing to mast: 275mm Suit 50-63mm masts. SOLO-2902
|
|
|
|
 |
GREAT HAWK Wind indicator for sailing cruisers. A lightweight, balanced vane-arm mounted above two reference arms, enabling the helmsman to judge accurately the angle of the apparent wind to the boat. Mast clip for fitting to either a horizontal or vertical surface. Vane and reference arms are fitted with reflective material for night use. Length of vane-arm: 380mm Overall height: 360mm SOLO-2900 SOLO-2900-1 Vane arm SOLO-2900-2 Port tracking arm SOLO-2900-3 Support rod SOLO-2900-4 Stb tracking arm SOLO-2900-6 Mast clip
|
|
|
|
 |
CAT HAWK Wind indicator for catamarans Sapphire bearing on stainless steel pivot for long low friction life. Snap fit attachment to bolt through bridle shackle or chain plate. Indicators and references designed for viewing from the side. Length of vane arm: 270mm Forestay to pivot: 250mm SOLO-2890 SOLO-2902-1 Vane arm
|
|
|
|
 |
CODE SIGNAL STICKERS SOLO-8020
|
|
|
|
 |
NYLON HOOKS SOLO-1330 Small SOLO-1340 Medium SOLO-1350 Large
|