|
|
|
|
INSPECTION HATCH Made of white Luran UV resisting opening 180 degrees. Very low (only 16.5mm thickness). Waterproof, rounded corners, anti skid surface. lock can be mounted.
External:
380x280mm Inside: 310x210mm 8041-562 5151-996 Lock to suit
|
|
|
|
 |
INSPECTION HATCH Made of white Luran UV resisting opening 180 degrees. Very low (only 16.5mm thickness). Waterproof, rounded corners, anti skid surface. Lock can be mounted.
External:
600x350mm Inside: 530x280 8041-565 5151-996 Lock to suit
|
|
|
|
 |
INSPECTION HATCH Made of white Luran UV resisting opening 180 degrees. Very low (only 16.5mm thickness). Waterproof, rounded corners, anti skid surface. Lock can be mounted.
External:
520x465mm Inside: 445x390mm 8041-571 5151-996 Lock to suit
|
|
|
|
 |
LOCKING HATCH TACKLE BOX White ABS construction. Gasket sealed door. Fitted with 3 drawers. Excellent for wall mounting.
External:
280x380mm Length: 240mm 8041-590 Tackle box 8041-592 Key lock device
|
|
|
|
 |
HOLD-ALL UNIT Ideal for small objects or fishing articles.
Height:
364mm
Recess:
321x140mm 8041-598
|
|
|
|
 |
SIDE POCKET HOLDER
Made
of white ABS. Inside: 500x200mm 8041-623
|
|
|
|
 |
POCKET HOLDER Made of white ABS.
Outside:
240x140mm Inside: 200x100mm 8041-620
|
|
|
|
 |
INSPECTION HATCH
Made
in white ABS. 8041-594
8041-596
|
|
|
|
 |
SIDE POCKET HOLDER With door, stainless steel hinge and brass lock. Made of white ABS.
Outside:
540x244mm Inside: 500x200mm 8041-625
Outside:
220x180mm Inside: 180mmx135mm 8041-627
|
|
|
|
 |
ACCESS HATCH 350mm x 590mm. Attractive low profile styling for an original equipment appearance. Easy to install hatch mounts on any flat surface both interior and exterior, but not intended for weather tight horizontal mounting. Suitable for a variety of uses in both the RV and marine industries including access doors, galley doors, inspection hatches, battery box lids, etc. 8041-513 White without locks 8041-519 White with locks
|
|
|
|
 |
ACCESS HATCH 270mm x 370mm Attractive low profile styling for an original equipment appearance. Easy to install hatch mounts on any flat surface both interior and exterior, but not intended for weather tight horizontal mounting. Suitable for a variety of uses in both the RV and marine industries including access doors, galley doors, inspection hatches, battery box lids, etc. 8041-501 White without lock 8041-506 White with lock
|
|
|
|
 |
BILGE BLOWER 2500 litres per minute, 76mm intake pipe. Spark proof. 3541-871 12v - 3amp 3541-872 24v - 1.5amp
|
|
|
|
 |
IN-LINE BLOWER 12volt. 76mm intake pipe. 210mm (L) x 135mm (W) x 111.5mm (H) 0091-535
|
|
|
|
 |
BILGE BLOWER WITH BRACKET 2500 litres per minute, 76mm intake pipe. Spark proof. 3541-876 12v - 3amp 3541-877 24v - 1.5amp
|
|
|
|
 |
IN-LINE BLOWER High impact ABS housing designed for a 4" ventilator hose. 12volt. 204mm (L) x 152mm (W) x 131mm (H) 0091-540
|
|
|
|
|
REFRIGERATOR VENT KIT The cooling unit on the back of the gas/electric refrigerator produces warm air that must be vented to the atmosphere. If this warm air is unable to escape, cooling performance is impaired. In particular, two parts on the back of the cooling unit must be exposed to outside air and thus cooled. 8018-601 Complete kit Replacement parts 8018-601-01 Plastic insert 8018-601-49 Lower mount frame 8018-601-50 Bottom vent 8018-601-54 Upper mount frame 8018-601-55 Top vent less insert 8018-601-57 Aluminium flue tube 8018-601-58 Black "T" piece & extension piece 8018-601-59 Black extension piece 8018-601-60 Black "T" piece 8018-601-65 Plastic securing clip
|
|
|
|
 |
12 VOLT EXTRACTOR FANS Complete with 20 watt light. Comes in white, gold and chrome. 8018-050 White 8018-052 Gold 8018-054 Chrome
|
|
|
|
 |
PLASTIC ROSE VENT Plastic adjustable opening vent. Often used for cross flow ventilation on horse-floats. Overall fixing flange diameter is 150mm. 8018-301
|
|
|
|
 |
ALUMINIUM ROSE VENT Aluminium ventilator with slotted apertures to allow adjustable airflow. Overall fixing flange diameter is 150mm. 8018-305
|
|
|
|
 |
SCUPPER VENT INTERNAL FRAME To suit Scupper Vent. 8018-421-55 t/s 240mm x 145mm vent 8018-421-50 t/s 165mm x 110mm vent
|
|
|
|
 |
METAL ROTARY VENT Metal spinning vent. 235mm. 8018-101 Complete vent Replacement parts 8018-141-01 Bearing 8018-101-01 Base
|
|
|
|
 |
PLASTIC ROTARY VENT Plastic spinning vent. 235mm. 8018-100 Complete vent Replacement parts 8018-121-05 Plastic cap
|
|
|
|
 |
LARGE SCUPPER VENT 2 springs. 240mm x 145mm. 8018-420 White powder coated 8018-421 Mill finish Replacement parts 8018-421-04 Spring & seal kit 8018-421-03 Double spring
|
|
|
|
 |
SMALL SCUPPER VENT 1 spring. 165mm x 110mm. 8018-400 White powder coated 8018-401 Mill finish Replacement parts 8018-421-01 Spring & seal kit 8018-421-02 Single spring
|
|
|
|
 |
HYPERVENT Constructed from lightweight flexible plastic yet rigid enough to hold its shape indefinitely. Prevents dampness and the accompanying annoyances including mildew and odour by supporting surface of mattress to permit warm air to circulate under the mattress or cushions, thereby minimizing an essential condition for condensation, circulating air promotes evaporation of moisture. Easily cut with scissors, 3" fabric flap for simple seaming, excellent durability, virtually maintenance free. Cleans with soap and water. 5032-003 per lineal metre
|
|
|
