FIAMMA F45 AWNING MOUNTING BRACKET KIT- SUIT VW T2 & VW T3
PART NO -
001261
In stock
FEATURES
- Suit all F45 model awnings
- 2 Brackets, each 80mm wide
- Suit VW T2, VW T3 built after 1980
Fiamma F45 VW T2 & T3 Bracket Kit, 98655-035. Suits VW T3 after 1980. Will also suit other vehicles that have a drip rail with a similar profile - Ensure there is aposition that does not prevent door opening, each bracket is 80mm wide, and comes down 75mm below drip rail. They should be located within 500mm ofawning ends. This bracket clamps onto the drip rail and has rubber protection on the lower brace.
When fitting 2.6m Fiamma F45 to a T3: It is worth noting the brackets on a VW T3 can only be placed in 2 locations on the van, and the centre points on thebrackets where the hole should be drilled lies underneath the shock absorbers on the 2.6m Fiamma 45S.
When fitting 2.6m Fiamma F45 to a T3: It is worth noting the brackets on a VW T3 can only be placed in 2 locations on the van, and the centre points on thebrackets where the hole should be drilled lies underneath the shock absorbers on the 2.6m Fiamma 45S.
